7
Section 4. Operation
4.1 Switch button and indicator
4.1.2
• Pool cleaner run time (duration) of one cycle when the battery is fully charged: 1.5hr.
• The climbing mode is “single front climbing’ meaning the front side with the indicator will
climb. The opposite side does not climb.
• At start up, the cleaner detect/calculate the pool size and will then start the cleaning cycle.
Push the button to ON to power on the cleaner;
Push the button to OFF to power off the cleaner
1. Blue light is steady on: power on
2. Green light flashes: the cleaner is working
3. Yellow light flashes: low battery and start to self-
parking
4. Yellow light is steady on: self-parking finished
To Next Page
Loading...