Version:V1.4 May 8th, 2021
ASENWARE LTD
ADDRESS: 6 PROSPECT WAY, ROYAL OAK INDUSTRIAL ESTATE DAVENTRY,
NORTHAMPTONSHIRE, ENGLAND, NN118PL
WEBSITE: www.asenware.com EMAIL: info@asenware.com
MANUFACTURER: ZHONGSHAN GUTA FIRE EQUIPMENT TECHNOLOGY CO.,LTD
ADDRESS: Xingye Rd, Huoju District Zhongshan City, Guangdong P.R. China
Conventional Manual Call Point AW-D135C
User Manual
------ Please read this Manual carefully before installing and using the product. -----
1. Overview
The AW-D135C Conventional manual call point is designed to be use with an intelligent two-wire
control system. If it is pressed after a fire is manually confirmed, an alarm signal may be sent to a fire
alarm control system which will, after receiving the alarm signal, display the equipment status of the
manual fire call points. When the manual fire call points is operating normally, the red indicator will blink;
when there is a fire alarm, it will remain lit.
2. Product characteristics
2.1 Semi-flush or surface mounting
2.2 Compatible with the latest EN standards
2.3 Lever reusable (non-glass break)
2.4 LED indicator
3. Technical parameters
3.1 Executive Standard: EN54-11
3.2 Operating voltage: 16VDC~24VDC
3.3 Operating current: monitoring status≤20uA, alarm status≤15mA
3.4 Application: For indoor use
3.5 Operating temperature: -10℃～55℃，Relative humidity: ≤95%(non-condensing)
3.6 Indicator: Red alarm indicator flashes when it is under normal condition,
press the manual button lit work
3.7 Materials and colors: ABS, red
3.8 Wiring: The promise of two bus system(Zone +, Zone -)
3.9 Size: 99mm*91.5mm*66.3mm
3.10 Mating Panel: Conventional fire alarm control panel
3.11 Weight: about 95g
3.12 DOP/EC Certificate: 2831-CPR-F2833
To Next Page
Need help?
General