FIG 6
FIG 5
FIG 4
FIG 3
FIG 2
FIG 7
BRUSH POSITION
LEVER
7
English
8. Insert the metal intake nozzle into the other end of the hose. Turning the nozzle clockwise while
pushing it into the hose end will help to securely seat the metal nozzle.
ACCESSORY STORAGE
1. Slide the narrow end of an extension tube into the Floor/Carpet Brush. Now slide the open extension
tube end over one the rings located above casters to store as shown in Figure 7.
2. Slide the other accessories over the remaining rings for storage.
3. If storage space permits or in between usage, you can leave the hose attached to vacuum port and
slide the metal nozzle over a ring for convenience.
To Next Page