Need help?Do you have a question about the Ashdown CTM 100 and is the answer not in the manual?
Expresses gratitude for purchase and guides users to register their product online for support.
Details instrument inputs (LOW/HIGH) and the effects send/return loop for external devices.
Explains EQ controls (Bass, Middle, Treble) and related shift and tone modification switches.
Covers GAIN for signal level, MASTER for output volume, and MUTE for silencing.
Describes the PRE/POST switch for DI output and the VU METER's functions.
Details the DI output for PA/recording and speaker outputs for cabinets, including impedance.
Explains the OFF/PREHEAT switch for valve warming and STANDBY/FULL for operation.
Lists power output, preamp tubes, controls, and features for CTM 300, 100, and DH200 models.
Lists power output, preamp tubes, controls, and features for CTM 30, LB30, and DH 30 models.
Lists power output, preamp tubes, controls, and features for CTM 15 and DH 15 models.
Describes PASSIVE/ACTIVE input selection and the INPUT control for signal level adjustment.
Details EQ controls, EQ IN/OUT switch, and PUSH FLAT/SHAPE function for tone modification.
Explains VALVE DRIVE control, its IN/OUT switch, and footswitch operation.
Describes compression for tone and sustain, and sub harmonics for thickening sound.
Explains PUSH TO MUTE function and TUNER OUT socket for silent tuning.
Details LINE OUT for external amps and OUTPUT LEVEL for overall volume.
Describes LINE INPUT for external sources and EFFECTS SEND/RETURN loop.
Details the 4-WAY FOOTSWITCH SOCKET and SPEAKER OUTPUTS for cabinets.
Explains OFF/PREHEAT for valve warming and STANDBY/FULL for operation.
Explains the VU meter's dual role in indicating audio output and tube balance/biasing.
Guides users on how to adjust tube bias using the meter and rear panel trimmers.
Details input selection, input control, EQ controls, and tone shaping switches.
Explains the GAIN, MASTER, and MUTE controls for amplifier operation.
Covers BRIGHT, MELLOW, MID SHIFT, BASS SHIFT, and VU METER.
Provides technical specifications for CTM 30 and CTM 15 models, including power and tubes.
Lists rear panel facilities such as DI OUTPUT, SPEAKER OUTPUTS, and power switches.
General| Power Output | 100W |
|---|---|
| Preamp Tubes | 3 x ECC83 |
| Power Amp Tubes | 2 x EL34 |
| Type | Tube Amplifier Head |
| Speaker Outputs | 2 x 1/4" jack |
| Inputs | 1 x 1/4" jack |
| EQ | Bass, Middle, Treble |
| Outputs | 1 x DI, 1 x effects loop |
| Additional Features | effects loop |
To Next Page
