Ashdown STUDIO Series - Studio 8; Studio 8 Front and Rear Panel Features

ASHDOWN ENGINEERING - STUDIO 8 ASHDOWN ENGINEERING - STUDIO 8
FEATURES
1. Input - a 1/4” Jack Socket for use with
your instrument
2. Volume - A rotary control to adjust the
overall output of the amp.
3. Bass - A rotary control to adjust the
amount of Bass +/- 15dB.
4. Middle - A rotary control to adjust the
amount of Middle +/- 15dB.
5. Treble - A rotary control to adjust the
amount of Treble +/- 15dB.
6. Line Mix - A rotary control to mix the
line level signal with your instrument
7. Line In - For use with a line level instrument
or audio device such as an MP3 player
8. On - light indicates the amplier is
powered.
9. Headphones - Mini Headphone Jack
Output.
10. IEC Power input - a fused IEC power inlet
for use with the supplied cable
11. Power Switch - Turn your amp on or off
12. Speaker Mute - To mute the speaker for
use with headphones
USER GUIDE
USER GUIDE