ASI DataMyte 600 - Page 48

Rev 3 Page 48
Device Preferences
Preference
Description
Settings
Key Click
Clicking sound when
Keypad key is pressed.
(On) or (Off)
Key Repeat
Auto-repeat when key is
pressed.
(On) or (Off)
Key Case
Determines default case of
letter.
(Upper) or (Lower)
Enable Buzzer
Turning on or off the buzzer.
(Enable) or (Disable)
Buzzer Volume
Determines the loudness of
the speaker.
(High) or (Low)
Buzzer Tone
Determines the pitch of the
speaker.
(1)–(16) (lower to higher)
LCD Brightness
Determines the brightness
of the display.
(1)–(8) (dim to bright)
LED Duration
Length of time the LED
status indicator lights
remains turned on.
(0)–(99) seconds
Backlight Time
Length of time backlight
remains on if unit is idle.
(0)–(999) seconds
Retake Prompting
Determines whether a
prompt asking the operator
to retake an out-of-spec
reading appears during data
collection.
(On) or (Off)
Unreasonable Readings
Determines the 600's
response to an obviously
erroneous reading. If
Reasonable Limits are used,
(Stop) does not accept the
reading and forces the
operator to retake the
reading; (Advance) fills the
reading with a NULL value.
(Stop) or (Advance)
Sort Setup List
Determines how the list of
setups is displayed.
(AlphaNum) or (None)
Save Torque Option
Determines when torque
curve data is stored in
memory.
(None), (On Spec Violation),
(Exceptions) or (Automatic)
View 1 Option
Determines which default
graphical representation of
data is displayed when the
<view> button is selected.
(None), (Torque Curve),
XBar & R Chart),
Histogram), (Histogram
Stats), (Xbar & S Chart),
(Chars Review) and
(Descriptors)
View 2 Option
Determines which default
graphical representation of
data is displayed when
<shift> then <view> buttons
are selected.
(None), (Torque Curve),
XBar & R Chart),
Histogram), (Histogram
Stats), (Xbar & S Chart),
(Chars Review) and
(Descriptors)