ASI DataMyte 600 User Manual

TranSend II - 600
Measurement Training
Manual

ASI DataMyte 600 Specifications

General

Category	Data Collector
Display	LCD
Input Method	Keypad
Connectivity	RS-232
Power Supply	Battery
Operating Temperature	0°C to 50°C

Summary

Introduction

TranSend II

Describes TranSend II features, database, and capabilities.

The model 600 data collector

Details the specifications and features of the 600 model data collector.

DM600 –TranSend II Configurations

Network Configuration

Explains the network setup for connecting multiple 600 data collectors to a central database.

Non Network Configuration

Describes the non-networked configuration where each 600 has a separate database.

TranSend II and Data Collector Training Goals

TranSend II Objectives

Lists the learning objectives for understanding and using TranSend II.

600 Objectives

Lists the learning objectives for operating the 600 data collector.

Editors Menu in Setup Editor

Setup Editor

Details the Setup Editor interface, including editors and panes for configuration.

Create a Setup

Create Characteristics

Send Setups to the 600

Data Collection with the 600

600 Configuration

Data Collection

Skill Set # 1

Guides users through collecting data, prompts, and label entry on the 600.

Upload Collected Data Using Express Data Refresh

Import Setups from TranSend Utility

Send Setups from TranSend II RCSL to the Collector

Skills Test #4

Receive Data Practice

Skills Test #5

Firmware Update Procedures

Creating new gages

Creating new gage use

Appendix B – Create a Gage Suite

Appendix C – Create a New Gage

Appendix D – Create a New Gage Use

Appendix E – Gage Suite Skillset

Create New Gage Suite for Peak (non-angle)

Steps to create a new gage suite for peak measurements, including aliases.

Appendix G – Audit Examples

Audit Example - Dynamic

Audit Example - Static

Appendix J – Torque Algorithms

Angle Based Restart

Explains Restart Torque for residual measurements, accounting for stiction.

Torque at Angle

Defines measured torque at a preset rotation angle past a starting torque threshold.

Set Torque

Describes Set Torque for manual fastening, recording peak torque and providing audible signals.

Peak Torque - Angle

Peak Torque - Time

Time Based Restart

Breakaway Torque

Pulsed Torque Parameters

Pulse Torque

Pulse Count

Angle

Angular Displacement—

Angle Set—

Appendix L – Troubleshooting

Battery performance issues:

Provides steps to resolve battery performance issues on the 600 data collector.

Collector Management:

Explains reasons for disabled menu selections and how to reinitialize memory.