ASI DataMyte 600 - Page 85

Rev 3 Page 85
Selected Option
Response
Establishes connectivity with the data collector.
Delete Setups from a connected device.
Select the firmware update file to be sent from the dialog.
Sends a gage configuration file used at the data collector to
reference what gages are attached to it and what the various
gage parameters are.
Receives a gage configuration file from the data collector.
Deletes the gaged configuration file from the data collector.
Receives a Torque Curve from a data collector.
Stops connectivity with the data collector.
Access to on-line help.
Exits the dialog.