7
4. Login to Your LTE Gateway
You can configure your gateway’s network settings using the Web User Interface (Web UI) by computer or mobile app. First
connect to your gateway, then access the Web UI, as shown below. Your gateway is pre-set with the WPA2 security, but you
should immediately change the default WiFi password, as well as the Web UI login password.
4.1 Connect by Smartphone
1. On your smartphone, scan available WiFi networks.
**iOS SCREENSHOT**
2. Select either of the networks named:
WiFi-2.4G
or
WiFi-5G
3. Enter the unique password found on your gateway’s box.
To Next Page
Loading...
Need help?
General
