THE CONTROL PANELTHE CONTROL PANEL
Model 1585 has a touchpad control panel, as illustrated below. To select a wash program or option, simply press the appropriate
touchpad. When you press a touchpad, a red indicator light at the upper left of the touchpad glows to show that you selected that
program or option. After you’ve selected the desired wash program and options, press Start.
WASH PROGRAMS AND OPTIONSWASH PROGRAMS AND OPTIONS
Your ASKO dishwasher has several wash programs and options specifically designed to reduce your energy costs and make your
life easier. Press the touchpad(s) to select the desired program and option(s). The indicator lights will come on for the program and
options you select.
Options
Wash Programs
Pots and pans
For the heaviest soiled loads, such as pots, pans,
casseroles, etc.
Norm wash
For normal wash loads.
Super wash
For dishes that have been sitting with dried food
on them for a while.
Quick wash
For lightly soiled loads washed immediately after
use. Items such as fine china and crystal can be
washed in this program, but you should use the
low temperature setting and turn the Heat dry off.
(Recommend 130° F)
Touchpad Controls
Press these touchpads to select
programs and options.
Indicator Lights
These lights glow red to indicate which
program and options you have selected.
Start
After you’ve selected the desired wash program and
options, press this touchpad to start the dishwasher.
Quick Start Guide
We know you’re excited about owning an ASKO dishwasher and you’re anxious to get started, so here’s a brief summary of the
operation procedures. The page references in this Guide refer to the Use and Care Guide. To get the most out of your dishwasher’s
features, we recommend that you read the Use and Care Guide.
Rinse and hold
To rinse dishes that you plan to wash later that
day.
Start
After you’ve selected your wash program and options,
press this touchpad to start the dishwasher.
If you’ve started the dishwasher then decide you want
to change a program or an option, press and hold Start
for five seconds to cancel the program and stop the
machine. Then press the touchpads for your desired
selections and press Start again. The drain pump will
run to remove any dirty water from the dishwasher
before starting the newly selected program.
Heat fan dry
Activates the heating element during the drying cycle to
speed up the drying process.
Temp
Lets you select a high or low water temperature for the
wash programs. (See “Temperature Options” on the
next page.) The indicator light glows when it’s on the
high setting and remains off when it’s on low.
PROGRAM MEMORYPROGRAM MEMORY
When you select the Pots and pans, Super wash, or Norm wash program, the dishwasher retains the settings until you change
them. Simply press Start to use the previous settings. If you want to use a different wash program or option, press the touchpad(s)
for the desired selections, then press Start.
Start
Stop
Model 1585
Rinse
and
hold
Temp
Super
wash
Norm
wash
Quick
wash
Heat
fan
dry
Cancel
Start
Stop
Pots
and
pans
To Next Page
Need help?
General
