Asko CO4927S - Timer and Filter Indicators

EN 6
USE
Switching on the timer
• Switch the fan on with the on/off button (A) and select the desired
extractor setting with buttons ‘B’ and ‘C’.
• Press the Timer button ‘F’.
The cooker hood switches off automatically after 30 minutes. Switch
off the Timer function by pressing button ‘F’ again, or by switching
off the cooker hood with button ‘A’. The display shows the selected
speed and the remaining time.
Grease filter indicator
After 100 hours of use the “FF” indicator is shown in the display.
• Clean the grease filters.
• Reset the filter indicator. While the cooker hood is switched off,
press button ‘E’ for 3 seconds until the filter indicator disappears.
Carbon filter indicator
After 200 hours of use the “EF” indicator is shown in the display.
• Clean the carbon filters.
• Reset the filter indicator. While the cooker hood is switched off,
press button ‘E’ for 3 seconds until the filter indicator disappears.