Asko D1876 - User Manual

THE CONTROL PANELTHE CONTROL PANEL
Model D1876 has a touchpad control panel, as illustrated below. To select a wash program or option, simply press the appropriate
touchpad. When you press a touchpad, a red indicator light at the upper left of the touchpad glows to show that you selected that program
or option.
Options
Programs
Quick Start Guide
We know you’re excited about owning an ASKO dishwasher and you’re anxious to get started, so here’s a brief summary of the operation
procedures. The page references in this Guide refer to the Use and Care Guide. To get the most out of your dishwasher’s features, we
recommend that you read the Use and Care Guide.
WASH PROGRAMS AND OPTIONSWASH PROGRAMS AND OPTIONS
Your ASKO dishwasher has several wash programs and options specifically designed to reduce your energy costs and make your life easier.
Press the touchpad(s) to select the desired program and option(s). The indicator lights will come on for the program and options you select.
Pots & pans / Sani wash
Cleans and sanitizes the heaviest soiled loads, such
as pots, pans, casseroles, etc.
Normal
For normal wash loads.
Quick
For lightly soiled loads washed immediately after use.
Items such as fine china and crystal can be washed in
this program, but you should use the low temperature
setting and turn the Heat dry off. (Recommend 130° F)
Rinse & hold
To rinse dishes that you plan to wash later that day.
Touchpad Controls
Press these touchpads to select
programs and options.
Indicator Lights
These lights glow red to indicate which
program and options you have selected.
LED Window
The LED window has four functions: to display temperature
settings, program run time, delay time, and fault codes.
PROGRAM MEMORYPROGRAM MEMORY
When you select the Pots and pans or Norm wash program, the dishwasher retains the settings until you change them. If you want to use
a different wash program or option, press the touchpad(s) for the desired selections, then press Start.
Economy
When used with the low temperature settings, this option
further reduces energy consumption without diminishing
cleaning performance by lowering the water temperature in
the prewash and main wash and extending the wash time.
Temp
Lets you select a high or low water temperature for the
wash programs. (See “Temperature Options” on the next
page.) The indicator light glows when it’s on the high
setting and remains off when it’s on low.
Heat dry
Activates the heating element during the drying cycle to
speed up the drying process.
Delayed Start
Lets you delay running the dishwasher for five hours.
After making your selections, press this touchpad then
press Start and close the door. The machine will start on
its own five hours later.
Model D1876
SUPER CLEANING SYSTEM
5
Start
After you’ve selected the desired wash program and
options, press this touchpad to start the dishwasher.
After you’ve selected the wash program and options, press Start.
If you’ve started the dishwasher then decide to change a program or an option, press and hold Start for five seconds to cancel
the program and stop the machine. Then press the touchpads for your desired selections and press Start again. The drain
pump will run to remove any dirty water from the dishwasher before starting the newly selected program.

Summary

The Control Panel

Touchpad Controls

Describes touchpads used to select wash programs and options on the control panel.

Indicator Lights

Explains how indicator lights glow red to show selected programs and options.

LED Window Functions

Details the four functions of the LED window: display settings, time, and fault codes.

Start and Stop Controls

Explains how to start the dishwasher and how to stop or cancel a program.

Wash Programs and Options

Wash Programs Overview

Details available wash programs like Pots & pans, Normal, Quick, and Rinse & hold.

Wash Options Explained

Explains special wash options: Economy, Temp, Heat dry, and Delayed Start.

Program Memory Function

Quick Start Procedures

Detergent Usage

LED Window Displays

Temperature Settings Display

Explains how the LED displays temperature selections in Celsius and Fahrenheit.

Program Time Display

Describes how the LED displays the program run time remaining.

Delay Time Display

Explains the LED display for the delayed start function.

Fault Codes

Details common fault codes (F1, F2, F3) and their meanings.

Understanding Indicator Lights

Commonly Asked Questions

Asko D1876 Specifications

General

Brand	Asko
Model	D1876
Category	Dishwasher
Language	English