19
When you have selected a program, the
display shows the length of time the pro-
gram took the last time it was used. When
you have started the machine, the display
window shows an approximate duration.
This time can vary a little from one occasion
to another depending on the temperature of
the incoming water, the amount of dishes,
the ambient temperature, etc.
During the time the program is operating,
the remaining program time is shown in the
window. If the remaining time is over 60
minutes, the total will be shown in hours,
followed by “h”, alternating with the number
of minutes. Example: 1h-25-1h-25, which
means that there is 1 hour and 25 minutes
of the program remaining.
Display
NB!
The remaining time display can be slightly
misleading during the first run of each pro-
gram, as the machine is estimating the time.
If the program takes longer than estimated,
1 minute will continue to show in the display
until the program is finished. For the second
running of any program, the machine will
calculate based on the previous duration of
the program. There is no need to call for
service it is merly an indication that the
machine is working correctly.
PROGPROG STARTSTART
To Next Page
Loading...
Need help?
General
