PC-UPGRADEPC-UPGRADE
MENUMENU
SETSET
STARTSTART
STOPSTOP
PROGPROG
Quick Start Guide
We know you’re excited about owning an ASKO dishwasher and you’re anxious to get started, so here’s a brief summary of the operation
procedures. The page references in this Guide refer to the Use and Care Guide. To get the most out of your dishwasher’s features, we
recommend that you read this guide and the Use and Care Guide before using the dishwasher.
PROGRAMS
To select a program, simply press the program button until the program you desire displays then press Start/Stop. The programs are
described below. You can also change certain program features. See “Options” below.
Auto Wash
The dishwasher has sensors that detect the level of soil on the
dishes and adjust the water consumption and temperature
accordingly. You cannot adjust the temperature or drying time with
this program.
Heavy Wash (Cold, 85° – 170° F/Sani)
For the heaviest soiled loads, such as casseroles or sauce pans.
Normal Wash (Cold, 85° – 170° F)
For normally soiled loads, such as plates, glasses, bowls, and
lightly soiled pans.
Mixed Wash
Designed to wash heavily soiled dishes in the lower basket and
lightly soiled dishes in the upper basket.
Upper Basket
Washes only the upper basket.
Delayed Start
This option allows you to delay starting the dishwasher from 1/2
hour to 24 hours. Press the Menu button until Delayed Start displays,
then press Set until the number of hours you wish to delay starting
the dishwasher displays along with a flashing clock symbol. Press
Menu then press Start/
Stop.
To cancel Delay after you press Start/
Stop, hold down the Start/Stop
button for three seconds. If you change your mind before you press
THE CONTROL PANEL
Your ASKO dishwasher has our state-of-the-art electronic control panel, as illustrated below.
OPTIONS
Once you have selected a program, you can change some of the program features by using the options (described below). To select an
option, simply press the Menu button until the option you desire displays, then press the Set button until the desired setting displays. Press
Menu to confirm your selection. You can continue to make programming changes or press Start/
Stop to start the program.
Program
button
Programming
buttons
Start/Stop
button
Lower Basket
Washes only the lower basket.
Delicate Wash (Cold, 140° F)
For delicate items, such as fine china and crystal, that are washed
immediately after use. When using this program, you should dry the
dishes without heat.
Quick Wash (Cold, 85° – 140° F)
For lightly soiled loads that are washed immediately after use. This
program can also be used for delicate items, but you should dry the
dishes without heat.
Rinse and Hold
To rinse dishes that you plan to wash later that day.
Rinse and Dry (120° F)
Rinses the dishes with hot water then activates the fan and heating
element to dry them.
Start/Stop, continue to press this button until “0” displays.
All Baskets
This option lets you set which spray arms will function. You have
three choices:
All Baskets – Washes both the upper and lower baskets
Upper Basket – Washes only the upper basket
Lower Basket – Washes only the lower basket
Options continued on next page...
Model D3530
SUPER CLEANING SYSTEM
Display
window
DISPLAY WINDOW
The display window shows the programs, options, remaining program time and fault codes. It also allows you to access the program menus
and customize the wash programs. If you select Delayed Start, the window will display the number of hours selected. When you press Start/
Stop, the countdown time displays.
Remaining program time – The remaining program time is calculated by the time it took the program to run last time. (Note: The first time
you run a program, the display will display 1:00.) As the program progresses, the time remaining displays the hour and minutes (e.g., 1:02,
which means one hour and two minutes.)
To Next Page
Need help?
General
