MAINTENANCE
Cleaning
Switch off the deep-frying pan and let it cool down.
The deep-frying pan can be disassembled for easy
cleaning.
A “drainage” setting allows for fastening the heating
element during cleaning.
Hinge with drainage setting
The hinge, which enables the flipping aside of the
heating element during cleaning, has been fitted with a
stainless steel locking system. By shifting this lock to
the right, the heating element is left ‘hanging’ over the
frying pan, while the oil or fat runs back into the
reservoir.
Outside
Clean the outside with cleaning agents for glass or
stainless steel. Do not use any scouring sponges or
abrasives.
The reservoir and the basket may be cleaned with the
rest of the washing-up. Both may be cleaned in the
dishwasher.
The heating element
Clean the heating element with a damp cloth. Be
careful not to damage the thermostat!
INSTALLATION INSTRUCTIONS
Building in
Built-in dimensions
Fitted-unit situation with space
Do not build in the deep-frying pan next to a gas
burner! If you wish to place the two appliances
independent of each other in the worktop, make sure
that there is at least 10 mm of space between them.
This corresponds with a distance between the cut-outs
of at least 50 mm.
To Next Page
Loading...