What to do if my Asko Hob shows error code F8 or F08?
If your Asko Hob displays error code F8 or F08, it indicates that the appliance has overheated. The hob has been switched off to prevent damage. To resolve this, allow the appliance to cool down completely. Once cooled, you can start cooking again, but use a lower heat setting to prevent recurrence.
What to do if my Asko Hob shows error code F00?
If your Asko Hob displays error code F00, it means the control panel is dirty or has water on it. Clean the control panel to resolve this issue.
Why does my Asko Hob suddenly stop working and beep?
If a cooking zone on your Asko Hob suddenly stops working and you hear a signal, it's likely because the preset time has ended. You can switch the beeping off by pressing the + or - button on the timer.
What to do if my Asko Hob is not working and the display is blank?
If your Asko Hob is not working and the display is blank, it suggests there's no power supply. This could be due to a defective cable or a faulty connection. Check the fuses or the electric switch (if there is no plug) to ensure a proper power supply.
What does error code FAN mean on my Asko Hob and how to fix it?
If your Asko Hob displays the error code FAN, it indicates that the air circulation is not good. To fix this, make sure the venting holes under the cooking plate are open to allow proper airflow.
Why does my Asko Hob show ‘br’ and the touch controls don't work?
If ‘br’ appears on the display of your Asko Hob and the touch controls are not working, it means the bridge function is activated. Deactivate the bridge function to restore normal operation.
What to do if my Asko Hob shows error code F7?
If your Asko Hob displays error code F7, it indicates that the ambient temperature is not good. Switch off all heat sources near the cooking plate to resolve this issue.
Why does a fuse blow when I switch on my Asko Hob?
If a fuse blows as soon as you switch on your Asko Hob, it suggests that the hob has been wrongly connected. Check the electrical connections to ensure they are correct.
What does it mean if my Asko Hob shows error code F9 and/or continuous beep?
If your Asko Hob displays error code F9 and/or a continuous beep, it indicates that the appliance has been connected incorrectly, or the mains voltage is too high. It is suggested to have your connection be changed.
What does error code FA on my Asko Hob mean?
If your Asko Hob shows error code FA, it means the mains voltage is too low. Contact your energy supplier to address this issue.
Detailed explanation of all buttons and indicators on the hob's control panel.
Explains how sensors prevent overheating by regulating power or switching off the hob.
Details the safety function that automatically switches off cooking zones after a set time.
Requirements for pans and important care instructions to prevent damage.
How to switch on zones, set power levels, and use quick power adjustment.
How to activate and deactivate the child lock to prevent accidental operation.
Daily and stubborn stain cleaning tips, including what not to use.
Advice on handling glass cracks and general troubleshooting approach.
Table listing common symptoms, their possible causes, and solutions.
Further troubleshooting for specific error codes and operational issues.
How to ignite and adjust the gas burner, including wok and roasting settings.
Instructions for cleaning burner parts, glass cover, and managing persistent stains.
Troubleshooting for gas smell, burner ignition failures, and electrical connections.
Solutions for burners not igniting evenly or extinguishing after ignition.
General| Brand | Asko |
|---|---|
| Model | PRO Series |
| Category | Refrigerator |
| Language | English |
To Next Page
