Asko Professional WMC64P - Close the Washer Door and Press the Start Button; During the Programme; Once the Program Has Fi Nished

15
Washing
6
Close the washer door and
press the Start button
NOTE!
A few seconds after you start a program, the
washing machine will begin to fi ll with water from
the hot and cold supplies. If for some reason no
hot water is available, the machine waits for one
minute and then fi lls with cold water only. The
wash drum does not start to rotate until it begins
to fi ll with water.
During the programme
Time remaining
“Programme started” is shown on the display.
Stopping or changing a programme
You can stop a programme by pressing the Stop
button for three seconds. ”Stop” appears in the
display. To restart the machine, select a new
programme, add any extra detergent needed
and press the Start button.
NOTE!
Do not open the detergent compartment while
the machine is running.
7
Once the program has fi nished
The text "End" is shown on the display
for 2 minutes. The machine then turns
off .
Once the program is fi nished, the washer door
will automatically unlock.
• Open the door and remove the laundry.
If you have small children or pets at home, close
the washer door once you have removed the
laundry.
NOTE!
Upon completion of the washing cycle, close the
water faucet and unplug the mains cord.