13
6
Undo the door hinge assembly (left) and the door
latch assembly (right), switch their positions, and
replace the screws (door hinge assembly to the right-
hand side, door latch assembly to the left-hand side).
Use a screwdriver to remove the plastic part more
easily.
7
Undo the door ring and remove it temporarily.
8
Rotate the door glass cover by 90°so that the sign
indicating the opening of the door is on the other
side.
9
Rotate the door ring by 180°, install it onto the
door, and fasten it with screws.
10
Replace the door on the door hinge and fasten
the screws.
To Next Page
Loading...
