34
CLEANING OF WATER CONDENSER
Clean the condenser when warning appears on the display.
1
During cleaning, some water may be spilled. It is
therefore recommended to place an absorbent
cloth on the fl oor.
Open the outer cover.
2
Hold the levers on the inside cover and rotate
them upwards.
Remove the inside cover.
3
Rotate the condenser unit lever up.
Use the handle to pull out the condenser unit.
4
Rinse the condenser unit with a jet of lukewarm
water on both sides, and drain well.
Do not poke into the openings between the
condenser unit ribs as this may damage the
condenser unit.
Do not wash the condenser unit in a dishwasher.
5
Use a soft damp cloth to clean:
– the area in front of the condenser unit where
water usually accumulates,
– the area behind the water condenser unit
(reach deep into the opening all the way to the
rear wall),
– condenser unit housing,
– all gaskets and sealing areas on the condenser
unit housing and door.
To Next Page
Loading...
