85
MAKING YOUR OWN DRYING PROGRAMS (T760/780)
SELECT THE INITIAL PROGRAM
Start by choosing one of the preset drying pro-
grams:
1. Press the button
, , or to select
the program you want to change.
PROGRAM
The programs you can choose are as follows:
Extra dry: This program is for textiles that are
particularly difficult to dry, e.g. jeans with very
thick seams.
Cupboard dry, Normal dry: These programs
switch off the heating when the washing is dry.
The Cupboard dry program switches off the hea-
ting rather later than Normal dry. Try them out
and see which suits you best. Use these programs
when you want your laundry to be completely
dry.
Iron dry: This program switches off the heating
when the washing has the right dampness for iro-
ning or mangling.
Timer program: The length of drying program
that you choose depends on what you want to do
with the laundry after you have finished drying
it. Experiment with different times for different
materials.
IMPORTANT
If you set a drying time that is too long, the laund-
ry may shrink, crease or feel rough. Synthetic
material may also become charged with static elec-
tricity.
Airing program:
You can use the Airing program when you just
want to shake the dust out of garments, air them
or soften them up.
When you are going to use the Timer or Airing
program you can easily change the program time:
1. Press the
button once.
2. Use the
buttons to choose the pro-
gram you want.If you choose the Timer or
Airing program you also have to decide how
long you want the program to run. When you
have arrived at the Timer or Airing program,
press the button to select the length of
time you want the program to last. Select the
desired time with the
buttons.
3. Confirm and save your choice by pressing the
button once.
OPTIONS
This heading has three sub-headings (option
headings) with options that you can add to your
personal program.
Cooling
You can choose either Normal Cooling or Quick
Cooling. Normal Cooling takes 20 minutes,
Quick Cooling takes 15 minutes.
1. Press the
button once.
2. Use the
buttons to choose Normal or
Quick Cooling.
3. Confirm and save your choice by pressing the
button once. You automatically go on to
the next sub-heading:
Signal
If you choose Signal On, a three second long au-
dible signal will sound when the drying program
is completed.
1. Use the
buttons to choose Signal On
or off.
2. Confirm and save your choice by pressing the
button once. You automatically go on to
the next sub-heading:
To Next Page
Loading...
