EasyManua.ls Logo

Asko T702 - Troubleshooting; Machine fails to start; Overheating prevention; Drying performance issues

Asko T702
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The machine will not start
Check
that the door is properly closed.
that the main power switch is on.
that any plug is connected.
that the fuses (circuit breakers) in your house
are intact. Flip the dryer breaker off and then
back on to make sure. You can not always tell
from the outside if the circuit breaker has
tripped.
that the overheating cut-off has not been trig-
gered (see below).
Overheating cut-off
The overheating cut-off shuts off the tumble dryer
if the temperature is too high, caused by lint
clogging the lint filter, for instance.
Clean the filter.
The overheating cut-off will reset automatically
once the machine has cooled down.
Drying takes too long
Check that the lint filter is not clogged (see the
"Care and maintenance" chapter).
The laundry does not dry, or is too
dry
The door has been opened while the program
is running, which disrupts the moisture monitor-
ing function.
Error messages
If the lights to the right of the Start/Stop button
are flashing, the maximum permitted program
time has been reached. Read "Drying takes
too long" in the "Troubleshooting" chapter to
find out what to do.
15Customer Care Center
1-800-898-1879
www.askousa.com
Troubleshooting

Other manuals for Asko T702

Related product manuals