11
Buzzer
The machine offers you the possibility to choo-
se an audible end signal. Set the option Buzzer
on
and it will sound for three seconds when
the program is completed.
Anti-crease
You can select the anti-crease option to
prevent the fabrics from lying still and beco-
ming creased at the end of the program. This is
a helpful option if you are unable to take out
the fabrics promptly at the end of the tumbling
phase.
You can choose this option for a duration of
1, 2 or 3 hours. The drum will then continue to
rotate intermittently, i.e., three seconds every
minute for the number of hours chosen.
If you choose Buzzer ON, a signal will sound
each time the drum rotates.
TEMPERATURE
You can select Low temperature for the
Extra dry, Dry, Normal dry and Iron dry pro-
grams.
DRYING TIME
The drying time may be influenced by a number
of factors, such as the size of the load, the pro-
gram selected, the moisture content of the load,
the materials being washed, connection capaci-
ty and the ambient temperature and humidity.
Drying time remaining is calculated within four
minutes of the start of the drying program. The
estimated time is shown in the bottom right-
hand corner of the display, together with the –
symbol.
If the actual drying time is less than that calcu-
lated, the time display may jump ahead, e.g.
from 50 to 20 minutes, at the end of the pro-
gram.
If the actual drying time is longer than that
calculated, the countdown will stop at the end
of the progam until the load is dry.
Please note that times include a cooling period.
The remaining drying time is estimated ap-
proximately (within four minutes of the start of
the drying program) and is shown on the dis-
play in intervals of five minutes.
To Next Page
Loading...
