14
Care and cleaning
Cleaning the lint lter
The lint lter must be cleaned after each load.
1. Lift the lter from the holder in the door.
2. Open the lint lter. Use your thumb to press
on the edge as illustrated and pull it out.
3. Use your hand or a soft cloth to remove the
lint from all sides of the lter. If necessary,
use a damp sponge and a small amount of
washing-up liquid to remove any deposits.
Dry the lter thoroughly with a towel.
NOTE!
Clean the surface of the lint (u) lter after
each drying program.
4. Close the lint lter and put it back in the door.
Close the lint lter before closing the door.
To Next Page
Loading...
