9
INSTALLATION AND CONNECTION
POSITIONING THE WASHING MACHINE
The washing machine can be installed as a built-
in (integrated) or a free-standing unit. Place the
machine on a level surface so that the power outlet
on the wall is accessible.
Before connecting the washing machine to the
power mains, wait for at least 2 hours until it reaches
room temperature.
If the appliance is installed on a plinth or a
similar structure, then the appliance must be fi xed to
it, to avoid the risk of falling.
ASKO original accessories are available for this
purpose, complete with fi xing instructions.
Built-in washing machine
The washing machine can be integrated under a
worktop with a height of 900–950 mm. Leave 5 cm
of room around the entire perimeter of the appliance,
including between the back edge of the upper cover
and the wall behind it.
Free-standing appliance
If you have a dryer of suitable dimensions (by
another dryer manufacturer), use the vacuum feet
to stack it on top of the washing machine, or place it
next to it.
Clearances around the washing machine
min. 50 mm
min. 50 mm
min. 50 mm
Opening the washing machine door (top view)
376 mm
942 mm
110°
To Next Page
Loading...
Need help?
General
