25
STEP 8: END OF PROGRAM
Cycle completed succsessfully
new
Start
Add
fav
5
After the end of the washing program,
the display will indicate that the program
has been successfully completed
("Cycle completed successfully").
Stop Anti
Cycle completed succsessfully
Anti
creasing
creasing
6
If you have selected the Anti-Crease
extra function, gentle tumbling will
continue after the end of the washing
program in order to prevent creasing.
Open the door towards you and remove the laundry from the washing machine.
Make sure the washing machine drum is empty.
If you do not take any action within 5 minutes after the end of the program, the display will switch off to
standby mode in order to save power.
The display will light up again if you press the ON/OFF button or open the washing machine door.
After the washing cycle, close the water intake and pull out the washing machine plug from the power
socket.
Favourite programs
Cycle completed succsessfully
new
Start
Add
fav
6
After the end of the program, you can
use the button 6 to store the program,
including all extra settings, as your
favourite program.
Make your list of four own favourite programs.
Up to 4 favourite programs can be
stored.
Confirm BackFav. list position: Favourite
42
Choose the favourite program position
(number) using the button 2; the most
recently used program, including all
settings, will be off ered.
To store a program, confi rm with the
button 4.
If you do not wish to store the program after the wash, rotate the Program selector knob and you will return to
the program selection; or, simply open the washing machine door.
To Next Page
Loading...
Need help?
General
