33
CLEANING THE RINSING HOLES (UNDER THE AGITATOR IN THE DRUM)
If you believe that objects like nails or paper clips fell into the washing machine drum, check the area
underneath the rib. Such objects may rust (corrode) and cause stains on your clothes. Nails and other sharp
objects can also cause holes in the fabric.
Proceed as follows:
1
Insert a screwdriver or a similar tool into the slot in
the rib and carefully push it to the left.
2
Hold the rib with the other hand and pull it towards
you.
3
Lift the drum rib.
4
Remove any objects.
5
Place the rib into the installation slot indicated with
"F" towards you. Make sure all ribs are fi rmly in
place in their respective slots in the drum. Push the rib
inwards (as indicated by the arrow in the fi gure) until it
snaps.
If you are using hard water
If you are washing with hard water (causing limescale build-up), a greyish-white fi lm may appear on the
washing machine drum. To remove this fi lm, add vinegar into the washing machine drum and select any
program with a temperature of 90 °C, or the Drum Cleaning program. See STEP 5: Choose the program.
Repeat the process as necessary.
To Next Page
Loading...
Need help?
General
