Asko W6444 - Machine Settings; Automatic Door Opening Setting; Adjusting Extra Rinse Cycles

You can change the following settings:
Automatic door opening.
Extra rinses.
Door opening
If you choose Automatic door opening the Washer door will open once the program has finished.
1.
Turn off the machine using the main power switch.
2.
Press and hold the Super rinse button and then switch on the main power switch.
3.
'AdO' is shown on the display if Automatic door opening is activated or 'AdF' if the option has not been
activated.
4.
Press the Super Rinse button to change the setting.
5.
Press the Door opening button to save the setting.
Extra rinses
Upon delivery, your washing machine is set to use three rinses in the Normal and Colour/White programs.
If you want to increase the number of rinses to five for these programs, do as follows:
1.
Turn off the machine using the main power switch.
2.
Press and hold the Delayed start button and then switch on the main power switch.
3.
The display shows "R O" if extra rinses (5 rinses) is activated or "R F" if it is not activated (3 rinses).
4.
Turn the program selector to change the setting.
5.
Press the Door opening button to save the setting.
17
Settings