04
Port number limit setting: select the “port number setting” item and click the icon
position to enter port number setting interface; click “+” and “-“ icons to set port number
limit value. Press “Fire” key to confirm and return to previous interface.
Port number resetting: select the “port number resetting” item and click the icon
position to enter port number resetting interface; click the icon of resetting to reset port
number. Press “Fire” key to confirm and return to previous interface.
Updating: select “updating” item and click the icon position to enter updating
confirmation interface; click the “YES” icon on updating confirmation interface and
pressure “Fire” key as prompted until the screen displays “Download Mode”.
Luminance setting: select “luminance setting” item and click the icon position
to enter luminance setting interface; click “+” and “-“ icons to set luminance
value. Press “Fire” key to confirm and return to previous interface.
Check the version: select “version” item and click the icon position to check
the system version; re-press “Fire” key to return to previous interface.
Resistance detection: When the device is on, press “Fire” key rapidly for 5
times to enter the setting interface; slide the screen left and right to select
resistance test interface; click the icon to test resistance (note: under the TEMP
mode, please confirm resistance detected is in cold state. This is the
precondition for normal operation of equipment!) click “ADJ” to revise
resistance value. Press “Fire” to confirm resistance value and quit.
5. Locking and unlocking
Unlocking of touch screen: When screen is unlocked, Swipe down on the
touch screen to unlock.
Locking of touch screen: press “Fire” key to lock.
Locking of system: When unlocked,press fire 3 times rapidly, press “Fire” key
rapidly by 3 times to lock.
Unlocking of system: When locked, press fire 3 times rapidly.
To Next Page
Loading...
