To Next PageTo Next Page
Need help?Do you have a question about the Aspen ABM24 and is the answer not in the manual?
General| Cooling Capacity | 24, 000 BTU/h |
|---|---|
| Cabinet Construction | Galvanized Steel |
| Category | Air Handler |
| Airflow | 800 CFM |
| Motor Type | PSC |
| Insulation | Foil Faced |
| Filter Type | 1" |
Explains symbols used for warnings and cautions, indicating potential hazards.
Critical warnings and precautions for connecting hydronic coils, including water temperature and solder types.
Critical warning to protect TXV sensing bulb and body from heat during brazing.
Guidance on selecting TXV compatible with refrigerant and correctly sizing valves for unit capacity.
Essential instructions for ensuring direct contact and correct placement of the TXV sensing bulb.
Specific instructions for mounting the TXV sensing bulb vertically for optimal performance.
Critical safety warnings regarding hot brazing joints and precautions for drilling.
Critical requirement for an auxiliary drain pan in horizontal installations to prevent warranty voiding.
Details on power supply, wiring standards, and compliance with electrical codes.
Essential steps to purge air from the hydronic coil and water lines before operation.
Critical warnings regarding hot water temperatures and safety precautions during startup.
