-32-
previously specified.
Call barring: The call barring function enables you to bar calls as needed. When setting this function, you
need to use a network barring code, which can be obtained from the network operator. If the code is wrong,
an error message will be prompted on the screen. After selecting a call barring option, continue to select
Activate or Deactivate. The mobile phone will prompt you to input the call barring code and then contact the
network. A moment later, the network will make a response and send the operation results to the mobile
phone.
❖ Advanced settings
Blacklist: Blacklist is used to block certain numbers from calling your phone. Note: blacklisted numbers will
still be able to message you. To add a person onto your blacklist. Go to phonebook and select a contact. Press
the left soft key to bring up options. Select “Add to black list.”
Others - Auto redial: Set it to On or Off to enable or disable auto redial. If you set Auto redial to On, the
mobile phone will automatically re-dial the number a moment later if the called party does not reply. The
number of auto redial times can be set to a maximum of 10. In the auto re-dial period, you cannot dial other
numbers. To end the auto-re-dial process, press the End key.
Note: This function requires support from the network operator to which the SIM card is registered.
Phone Settings – go to Settings – Phone settings
❖ Time and date: set the date format, and the time format.
Note: If you remove the battery from the mobile phone or if the battery energy was exhausted a long time ago,
you may need to reset the date and time when re-inserting the battery or powering on the mobile phone after
To Next Page
Loading...
