-Using code
The mobile phone and the SIM cards support passwords, to prevent the phone and
the SIM cards from unauthorized usage. When you are prompted to input any of
the codes mentioned below, just input the correct code and then press the ok key.
If you input a wrong code, press the Right soft key to clear it and then input the
correct code.
-Phone lock code
The phone lock code may be set to prevent your mobile phone from being
misused. In general, this code is provided along with the mobile phone by the
manufacturer. The initial phone lock code is set to 0000 by the manufacturer. If the
phone lock code is set, you need to input the phone lock code when powering on
the mobile phone.
-PIN
The PIN (Personal identification number, 4 digits) code prevents your SIM card
from being used by unauthorized people. In general, the PIN is supplied with SIM
card by the network operator. If PIN check is enabled, you need to input the PIN
each time when you power on your mobile phone. The SIM card will be locked if
you input the wrong PIN code three times.
15
To Next Page
Loading...
