INDOOR UNIT INSTALLATION
Indoor Unit Parts
!!
WARNING
The indoor unit shall be firmly installed on the structure capable of bearing its weight. If the
structure is too weak, the unit may fall and cause personal injury, property loss or death
DO NOT install the indoor unit in the bathroom or laundry because too much moisture will
short circuit the indoor unit and corrode the wiring.
Install the indoor unit at a height of more than 2.5m (8') above the floor.
CAUTION
!!
Install indoor and outdoor equipment, cables and wires at least 1 m (3.2 ') from TV and
radio to prevent static electricity or image distortion. The distance can be increased
appropriately according to different equipment
If the indoor unit is installed on metal, it must be electrically grounded.
DO NOT install the unit in the following locations:
In areas with oil drilling or fracking
In coastal areas with high salt content in the air
In areas with caustic gases in the air, such as near hot springs
In areas with power fluctuations, such as factories
In enclosed spaces, such as cabinets
In kitchens that use natural gas
In areas with strong electromagnetic waves
In areas that store flammable materials or gas
In rooms with high humidity such as bathrooms or laundry rooms
PRECAUTION
³ö·ç³ö·ç
Air Outlet
Air InletFilter
Refrigerant Pipe
Pipe Juntion
Drainage Pipe
Mounting Hook
Electric Control Box
3
To Next Page
Loading...
