Aspire Zelos 50W Kit - Lock;Unlock Adjustment Buttons; Select the Vaping Mode; Adjustments in TC Mode; Adjust the Power Output

36
Press the re button 3 time rapidly when the mod is on will turn it into or out
of stealth mode. While in stealth mode, the re button still functions, but “+”
and “-” buttons are all locked. This feature allows you to prevent accidental
adjustment of the performance of the device.
Press “+” and “-” buttons simultaneously will allow you to select between
VW, VV, Bypass and TC (Ni,Ti, SS) modes. Pressing “+” or “-” button to
select your vaping mode. Conrm your selection by pressing the re button.
Press the “+” button to increase wattage, voltage or temperature or the
“-” button to decrease. Press “+” or “-” button continuously to change the
values faster.
To change temperature to Fahrenheit (F) or to Celsius (C), press the “+” or
the “-” button all the way to pass the temperature range. The temperature
will switch over to either Celsius or Fahrenheit automatically.
Press in TC mode the re button and the “-” button simultaneously to enter
the wattage setting interface. Here you can adjust the max. output power
under TC mode just by clicking the “+” or the “-” button. Conrm your
settings by pressing the re button. Press the re button and the “+” button
simultaneously to lock or unlock the buttons. When the buttons are locked,
wattage, voltage and TC settings can not be adjusted.
Lock/Unlock Adjustment Buttons
Select the Vaping Mode
Adjust the Power Output
Switch between °C and °F
Adjustments in TC Mode
Using the Device