ASROCK Rack SPC621D8-2L2T User Manual

78 79
English
3.4 Security
In this section, you may set or change the supervisor/user password for the system. For the
user password, you may also clear it.
Supervisor Password
Set or change the password for the administrator account. Only the administrator
has authority to change the settings in the UEFI Setup Utility. Leave it blank and
press enter to remove the password.
User Password
Set or change the password for the user account. Users are unable to change the
settings in the UEFI Setup Utility. Leave it blank and press enter to remove the
password.
Secure Boot
Use this to enable or disable Secure Boot Control. e default value is [Disabled].
Enable to support Windows Server 2012 R2 or later versions Secure Boot.
Secure Boot Mode
Secure Boot mode selector: Standard/Custom. In Custom mode Secure Boot Vari-
ables can be congured without authentication.

ASROCK Rack SPC621D8-2L2T Specifications

General

Form Factor	SSI EEB
CPU Socket	LGA 3647
Chipset	Intel C621
Memory Type	DDR4
Maximum Memory	2TB
SATA Ports	8
Memory Slots	8
Memory Speed	2933 MHz
Storage Interfaces	M.2
10G LAN	Yes
Power Connector	24-pin ATX