ASROCK Rack X570D4I-2T - Page 24

20 21
English
ATX 12V Power
Connector
(8-pin ATX12V2)
(see p.6, No. 4)
4
8
1
5
12V
GND
e motherboard provides one
8-pin 12V power connector
which is a required input for
either DC-IN 12V or ATX
+12V power source.
When using ATX power, it is
necessary to use a 24pin-to-
4pin power cable to connect
between the 24pin power
connector of PSU and the
ATX4PIN1 connector on the
motherboard for power supply
and signal communication.
ATX 4-PIN Power
Connector
(4-pin ATX4PIN1)
(see p.6, No. 3)
ATX_PG+5VSB
GNDPSON#
1
2
3
4
e motherboard provides one
4-pin power/signal connector
which is a required input for
ATX power source.
When using ATX power, it is
necessary to use a 24pin-to-
4pin power cable to connect
between the 24pin power
connector of PSU and the
ATX4PIN1 connector on the
motherboard for power supply
and signal communication.
For DC-IN 12V application,
it is not necessary to use this
ATX 4-PIN power connector.
*Caution: Misconnection between the
ATX4PIN1 and the SATAPWR1 con-
nectors may permanently damage the
motherboard.