ASROCK Rack X570D4I-2T - Page 25

X570D4I-2T
20 21
English
1
IntA_PB_D+
Dummy
IntA_PB_D-
GND
IntA_PB_SSTX+
GND
IntA_PB_SSTX-
IntA_PB_SSRX+ IntA_PB_SSRX- VbusVbus
Vbus
IntA_PA_SSRX-
IntA_PA_SSRX+
GND
IntA_PA_SSTX-
IntA_PA_SSTX+
GND
IntA_PA_D-
IntA_PA_D+
SATA Power Connector
(4-pin SATAPWR1)
(see p.6, No. 14)
1 2
3 4
+5V
GND
+12V
GND
Please use a SATA power cable
to connect this SATA Power
Connector and your SATA
HDD for supplying power
from the motherboard, when
using DC-IN mode without
SATA power supply.
*Caution: Misconnection between the
ATX4PIN1 and the SATAPWR1 con-
nectors may permanently damage the
motherboard.
USB 3.1 Gne1 Header
(19-pin USB3_3_4)
(see p.6, No. 10)
Besides two default USB 3.1
Gen1 ports on the I/O panel,
there is one USB 3.1 Gen1
header on this motherboard.
is USB 3.1 Gen1 header
can support two USB 3.1 Gen1
ports.
System Fan Connectors
(4-pin FAN1)
(see p.6, No. 8)
(4-pin FAN2)
(see p.6, No. 12)
(4-pin FAN3)
(see p.6, No. 13)
GND
FAN_VOLTAGE_CONTROL
FAN_SPEED
FAN_SPEED_CONTROL
Please connect fan cables to the
fan connector and match the
black wire to the ground pin.
All fans support Fan Control.
TPM Header
(13-pin TPM1)
(see p.6, No. 7)
+3V +3V GND LAD3 LFRAME GND33M
RST
LAD0
LAD2
GND
+3V
LAD1
1
is connector supports
Trusted Platform Module
(TPM) system, which can
securely store keys, digital
certicates, passwords, and
data. A TPM system also helps
enhance network security,
protects digital identities, and
ensures platform integrity.