ASROCK B660 PRO RS - Page 26

English
22
SPI TPM Header
(13-pin SPI_TPM_J1)
(see p.1, No. 17)
is connector supports SPI
Trusted Platform Module (TPM)
system, which can securely store
keys, digital certicates, passwords,
and data. A TPM system also helps
enhance network security, protects
digital identities, and ensures
platform integrity.
underbolt AIC
Connector
(5-pin TB1)
(see p.1, No. 26)
Please connect a underbolt™ add-
in card (AIC) to the underbolt
AIC connector via the GPIO cable.
*Please install the underbolt™
AIC card to PCIE3 (default
slot).
RGB LED Header
(4-pin RGB_LED1)
(see p.1, No. 27)
is RGB header is used to connect
RGB LED extension cable which
allow users to choose from
various LED lighting eects.
Caution: Never install the
RGB LED cable in the wrong
orientation; otherwise, the cable
may be damaged.
*Please refer to page 36 for further
instructions on this header.
Addressable LED
Headers
(3-pin ADDR_LED1)
(see p.1, No. 28)
(3-pin ADDR_LED2)
(see p.1, No. 7)
(3-pin ADDR_LED3)
(see p.1, No. 6)
ese headers are used to connect
Addressable LED extension cables
which allow users to choose from
various LED lighting
eects.
Caution: Never install the Ad-
dressable LED cable in the wrong
orientation; otherwise, the cable
may be damaged.
*Please refer to page 37 for
further instructions on this header.
1
SPI_DQ 3
SPI_PW R
SPI_DQ 2
SPI_CS 0
Dummy
CLK
SPI_MI SO
SPI_MO SI
GND
SPI_TP M_CS#
RST#
RSMRST #
TPM_PI RQ
12V G R B
1
VOUT
DO_ADDR
GND
1