Fatal1ty P67 Performance Series Motherboard
11
English
CAUTION!
1. About the setting of “Hyper Threading Technology”, please check page
51 of “User Manual” in the support CD.
2. This motherboard supports Dual Channel Memory Technology. Before
you implement Dual Channel Memory Technology, make sure to read the
installation guide of memory modules on page 16 for proper installation.
3. DDR3 frequency options may depend on the processor. Only K-Series
CPU can support DDR3 overclock to 2133 and 1866.
4. Due to the operating system limitation, the actual memory size may be
less than 4GB for the reservation for system usage under Windows
®
7 /
Vista
TM
/ XP. For Windows
®
OS with 64-bit CPU, there is no such limita-
tion.
5. For microphone input, this motherboard supports both stereo and mono
modes. For audio output, this motherboard supports 2-channel, 4-chan-
nel, 6-channel, and 8-channel modes. Please check the table on page 5
for proper connection.
6. F-Stream is an all-in-one tool to fi ne-tune different system functions in a
user-friendly interface, which currently includes Hardware Monitor, Fan
Control, Overclocking, OC DNA, Mouse Polling and IES. In the Hardware
Monitor mode, F-Stream shows the major readings of your system. In
Fan Control mode, F-Stream shows the fan speed and temperature for
you to adjust. In Overclocking Control mode, F-Stream allows you to
overclock the CPU frequency for optimal system performance. In OC
DNA mode, you can save your OC settings as a profi le and share them
with your friends. Your friends can then load the OC profi le in to their own
system to get the same OC settings. In Mouse Polling mode, F-Stream
allows you to adjust the mouse polling rate of the Fatal1ty Mouse port to
add a professional level mouse confi guration. In IES (Intelligent Energy
Saver) mode, the voltage regulator can reduce the number of output
phases to improve effi ciency when the CPU cores are idle without sacri-
fi cing computing performance.
7. Instant Flash is a BIOS fl ash utility embedded in Flash ROM. This con-
venient BIOS update tool allows you to update system BIOS without
entering operating systems fi rst like MS-DOS or Windows
®
. With this util-
ity, you can press <F6> key during the POST or press <F2> key to BIOS
setup menu to access Instant Flash. Just launch this tool and save the
new BIOS fi le to your USB fl ash drive, fl oppy disk or hard drive, then you
can update your BIOS only in a few clicks without preparing an additional
fl oppy diskette or other complicated fl ash utility. Please be noted that the
USB fl ash drive or hard drive must use FAT32/16/12 fi le system.
To Next Page
Loading...
Need help?
General
