Name: ASROCK Fatal1ty X99X Killer Series
Brand: ASROCK
Rating: 4 (1 reviews)

To Next Page

To Previous Page

English

Fatal1ty X99X Killer Series

Step 1

Power on your computer and boot into OS.

Step 2

Remove the AMD drivers if you have any VGA drivers installed in your system.

Step 3

Install the required drivers and CATALYST Control Center then restart your

computer. Please check AMD’s website for details.

2.10.3 Driver Installation and Setup

Step 4

Double-click the AMD Catalyst Control

Center icon in the Windows

system tray.

Step 5

In the le pane, click Performance and

then AMD CrossFireX

. en select

Enable AMD CrossFireX and click Apply.

Select the GPU number according to your

graphics card and click Apply.

AMD Catalyst Control Center

e Catalyst Uninstaller is an optional download. We recommend using this utility to un-

install any previously installed Catalyst drivers prior to installation. Please check AMD’s

website for AMD driver updates.

Other manuals for ASROCK Fatal1ty X99X Killer Series

Questions and Answers:

Need help?

Do you have a question about the ASROCK Fatal1ty X99X Killer Series and is the answer not in the manual?

General

Chipset	Intel X99
CPU Socket	LGA 2011-v3
Max Memory	128GB
Form Factor	ATX
Memory Slots	8 x DIMM
Expansion Slots	3 x PCIe 3.0 x16, 2 x PCIe 2.0 x1
Multi-GPU Support	AMD 3-Way CrossFireX, NVIDIA Quad SLI
Storage Interface	10 x SATA3
USB Ports	4 x USB 3.0 ports (2 on the rear panel, 2 via header), 8 x USB 2.0 ports (4 on the rear panel, 4 via header)
Audio	Realtek ALC1150 Audio Codec
LAN	Killer E2200 Series Gigabit LAN
Memory Support	DDR4 2800(OC)/2400(OC)/2133