52
Multiplier/Voltage Change
This item is set to [Auto] by default. If it is set to [Manual], you may adjust
the value of Processor Frequency and Processor Voltage. However, it is
recommended to keep the default value for system stability.
Boost Frequency Multiplier
For safety and system stability, it is not recommended to adjust the value
of this item.
CPU Frequency Multiplier
For safety and system stability, it is not recommended to adjust the value
of this item.
CPU Voltage
It allows you to adjust the value of CPU voltage. However, for safety and
system stability, it is not recommended to adjust the value of this item.
CPU Voltage Offset
It allows you to adjust the value of CPU voltage offset. However, for safety
and system stability, it is not recommended to adjust the value of this item.
CPU NB Frequency Multiplier
For safety and system stability, it is not recommended to adjust the value
of this item.
CPU NB/GFX Voltage
It allows you to adjust the value of CPU NB/GFX voltage. However, for
safety and system stability, it is not recommended to adjust the value of
this item.
APU Load-line Calibration
APU Load-line Calibration helps prevent APU voltage droop when the
system is under heavy load.
GFX Engine Clock
Use this to adjust GFX Engine Clock. The default value is [Auto].
DRAM Timing Conguration
DRAM Frequency
If [Auto] is selected, the motherboard will detect the memory module(s)
inserted and assigns appropriate frequency automatically.
To Next Page
Loading...
