SATA Controller
Use this item to enable or disable the “SATA Controller” feature.
SATA Mode
Use this item to adjust SATA Mode. The default value of this option is [AHCI
If you set this item to RAID mode, it is suggested to install SATA
ODD driver on SATA_5 and SATA_6 ports.
AMD AHCI BIOS ROM
Use this item to enable or disable AMD AHCI BIOS ROM. The default
value of this option is [Disabled].
SATA IDE Combined Mode
This item is for SATA_5 and
SATA_6
.
Use this item to enable or disable SATA IDE combined mode. The default
value is [Enabled].
If you want to build RAID on SATA_5 and SATA_6 ports, please
disable this item.
Hard Disk S.M.A.R.T.
Use this item to enable or disable the S.M.A.R.T. (Self-Monitoring, Analy-
[Auto], [Enabled].
To Next Page
Loading...
