ASROCK FM2A88M Extreme4+ R2.0 - Hardware Health Event Monitoring Screen

61
CPU Fan 1 & 2 Setting
ThisallowsyoutosettheCPUfan1&2speed.Congurationoptions:[Full
On] and [Automatic Mode]. The default is value [Full On].
Chassis Fan 1 Setting
Thisallowsyoutosetthechassisfan1speed.Congurationoptions:[Full
On], [Manual Mode] and [Automatic Mode]. The default is value [Full On].
Over Temperature Protection
Use this item to enable or disable Over Temperature Protection. The
default value is [Enabled].
Case Open Feature
This allows you to enable or disable case open detection feature. The
default is value [Disabled].
Clear Status
This option appears only when the case open has been detected. Use this
option to keep or clear the record of previous chassis intrusion status.
4.6 Hardware Health Event Monitoring Screen
In this section, it allows you to monitor the status of the hardware on your system,
including the parameters of the CPU temperature, motherboard temperature, CPU
fan speed, chassis fan speed, and the critical voltage.