4343
4343
43
ASRock VDrop Control
Use this to enable or disable ASRock VDrop control. Configuration options:
[With VDrop] and [Without VDrop]. The default value is [With VDrop].
CPU Voltage
Use this to select CPU Voltage. Configuration options: [Auto], [Manual] and
[Overdrive Offset]. The default value is [Auto].
DRAM Voltage
Use this to select DRAM Voltage. Configuration options: [Auto], [1.30V] to
[2.05V]. The default value is [Auto].
VTT Voltage
Use this to select VTT Voltage. Configuration options: [Auto], [1.11V] to
[1.55V]. The default value is [Auto].
PCH Voltage
Use this to select PCH Voltage. Configuration options: [Auto], [1.05V],
[1.15V] and [1.25V]. The default value is [Auto].
CPU PLL Voltage
Use this to select CPU PLL Voltage. Configuration options: [Auto], [1.81V],
[1.94V], [2.06V] and [2.18V]. The default value is [Auto].
CPU GFX Offset Voltage
Use this to select CPU GFX offset Voltage. Configuration options: [Auto],
[+0 mV] to [+300 mV]. The default value is [Auto].
Would you like to save current setting user defaults?
In this option, you are allowed to load and save three user defaults
according to your own requirements.
To Next Page
Loading...
