37
Four Activate Window (tFAW)
Use this item to change Four Activate Window (tFAW) Auto/Manual set-
ting. The default is [Auto].
Memory Power Down Mode
Use this item to adjust DDR power down mode. Configuration options:
[Auto], [Slow] and [Fast]. The default value is [Auto].
ODT WR (CHA)
Use this item to change ODT WR (CHA) Auto/Manual setting. The default
is [Auto].
ODT NOM (CHA)
Use this item to change ODT NOM (CHA) Auto/Manual setting. The de-
fault is [Auto].
ODT WR (CHB)
Use this item to change ODT WR (CHB) Auto/Manual setting. The default
is [Auto].
ODT NOM (CHB)
Use this item to change ODT NOM (CHB) Auto/Manual setting. The de-
fault is [Auto].
Voltage Control
Power Saving Mode
Use this to enable or disable Power Saving Mode. The default value is
[Disabled].
CPU Core Voltage
Use this to select CPU Core Voltage. The default value is [Auto].
IGPU Voltage
Use this to select IGPU Voltage. The default value is [Auto].
PCH Voltage
Use this to select PCH Voltage. The default value is [Auto].
CPU PLL Voltage
Use this to select CPU PLL Voltage. The default value is [Auto].
VTT Voltage
Use this to select VTT Voltage. The default value is [Auto].
DRAM Voltage
Use this to select DRAM Voltage. The default value is [Auto].
VCCSA Voltage
Use this to select VCCSA Voltage. The default value is [Auto].
User Default
In this option, you are allowed to load and save three user defaults
according to your own requirements.
To Next Page
Loading...
Need help?
General
