To Next Page

To Previous Page

2.4 Setting the BIOS RAID Items

After installing the hard disk drives, please set the necessary

RAIDitemsintheBIOSbeforesettingyourRAIDconguration.

Boot your system, and press <F2> key to enter BIOS setup

utility.GotoAdvanced Storage Congurationandsetthe

option SATA Mode Selection to [RAID]. Press <F10> key to

saveyourchangebeforeyouexitBIOSsetup.

2.5 Conguring a RAID array

YoucancongureaRAIDarrayusingeitherUEFISetupUtility

or Intel

RAIDBIOSsetuputility.

2.5.1 Conguring a RAID array Using UEFI Setup Utility

STEP 1:

For Windows

Go to UEFI SETUP UTILITY Boottoset“FastBoot”to[Ultra

Fast].

Go to UEFI SETUP UTILITY Boottodisable“CSM”.

For Windows

Go to UEFI SETUP UTILITY Boot CSM toset“Launch

StorageOpROMpolicy”to[UEFIonly].

ASROCK H87M Installation And Configuration Guide

Other manuals for ASROCK H87M