ASROCK RIPTIDE Z790 PG - M.2 SSD Installation (M2_1, M2_5)

English
41
Z790 PG Riptide
2.15 M.2 SSD Module Installation Guide (M2_1 and M2_5)
e M.2 is a small size and versatile card edge connector that aims to replace mPCIe and
mSATA. e Hyper M.2 Socket (M2_1, Key M) supports type 2280 PCIe Gen4x4 (64 Gb/s)
mode. e Blazing M.2 Socket (M2_5, Key M) supports type 2280 PCIe Gen5x4 (128 Gb/s)
mode.
* If M2_5 is occupied, PCIE1 will downgrade to x8 mode.
* Either M2_1 or M2_5 can be used at a time.
Installing the M.2 SSD Module
Step 1
Prepare a M.2 SSD module and the
screw.
Step 2
Depending on the PCB type and
length of your M.2 SSD module, nd
the corresponding nut location to be
used.
No. 1
Nut Location A
PCB Length 8cm
Module Type Type 2280