6767
6767
67
BIOS SETUP UTILITY
Advanced PCI / PnP Settings
ValueinunitsofPCI
clocks for PCI device
latency timer
register.
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
PCI Latency Timer
PCI IDE BusMaster
[64]
[Enabled]
Advanced
3.4.53.4.5
3.4.53.4.5
3.4.5
PCIPnP ConfigurationPCIPnP Configuration
PCIPnP ConfigurationPCIPnP Configuration
PCIPnP Configuration
PCI Latency Timer
The default value is 32. It is recommended to keep the default value unless
the installed PCI expansion cards’ specifications require other settings.
PCI IDE BusMaster
Use this item to enable or disable the PCI IDE BusMaster feature.
DMA Mode
DMA capability allows the improved transfer-speed and data-integrity for com-
patible IDE devices.
S.M.A.R.T.
Use this item to enable or disable the S.M.A.R.T. (Self-Monitoring, Analysis,
and Reporting Technology) feature. Configuration options: [Disabled], [Auto],
[Enabled].
32-Bit Data Transfer
Use this item to enable 32-bit access to maximize the IDE hard disk data
transfer rate.
AHCI CD/DVD Boot Time Out
Some SATA CD / DVD in AHCI mode need to wait ready longer. Configuration
options: [0], [5], [10], [15], [20], [25], [30] and [35]. The default value is [35].
To Next Page
Loading...
Need help?
General
