ASROCK Z690 PG Riptide - Page 32

English
25
Z690 PG Riptide
RGB LED Header
(4-pin RGB_LED1)
(see p.7, No. 30)
is RGB header is used to
connect RGB LED extension
cable which allow users to choose
from various LED lighting
eects.
Caution: Never install the
RGB LED cable in the wrong
orientation; otherwise, the cable
may be damaged.
*Please refer to page 56 for
further instructions on this
header.
Addressable LED Headers
(3-pin ADDR _LED1)
(see p.7, No. 29)
(3-pin ADDR _LED2)
(see p.7, No. 8)
(3-pin ADDR _LED3)
(see p.7, No. 7)
ese headers are used to connect
Addressable LED extension ca-
bles which allow users to choose
from various LED lighting
eects.
Caution: Never install the
Addressable LED cable in the
wrong orientation; otherwise,
the cable may be damaged.
*Please refer to page 57 for
further instructions on this
header.
+12V GRB
1
VOUT
DO_ADDR
GN
D
1