ASROCK Z690 PG Riptide - Page 82

English
75
Z690 PG Riptide
+1.05V PROC Voltage
Congure the voltage for the +1.05V PROC.
PLL Voltage Conguration
Core PLL Voltage Oset
Use this feature to set the PLL Voltage Oset value from 0-15 with each unit at
17.5mV. is is used to increase the range of the domain frequency in extreme
overclocking conditions. Enter 0 to use the manufacturer default value.
GT PLL Voltage Oset
Use this feature to set the PLL Voltage Oset value from 0-15 with each unit at
17.5mV. is is used to increase the range of the domain frequency in extreme
overclocking conditions. Enter 0 to use the manufacturer default value.
Ring PLL Voltage Oset
Use this feature to set the PLL Voltage Oset value from 0-15 with each unit at
17.5mV. is is used to increase the range of the domain frequency in extreme
overclocking conditions. Enter 0 to use the manufacturer default value.
System Agent PLL Voltage Oset
Use this feature to set the PLL Voltage Oset value from 0-15 with each unit at
17.5mV. is is used to increase the range of the domain frequency in extreme
overclocking conditions. Enter 0 to use the manufacturer default value.
Atom Core PLL Voltage Oset
Use this feature to set the PLL Voltage Oset value from 0-15 with each unit at
17.5mV. is is used to increase the range of the domain frequency in extreme
overclocking conditions. Enter 0 to use the manufacturer default value.
Memory Controller PLL Voltage Oset
Use this feature to set the PLL Voltage Oset value from 0-15 with each unit at
17.5mV. is is used to increase the range of the domain frequency in extreme
overclocking conditions. Enter 0 to use the manufacturer default value.
AVX Conguration
AVX2 Voltage Guardband Scale Factor
AVX2 Voltage Guardband Scale Factor controls the voltage guardband applied to
AVX2 workloads. A value > 1.00 will increase the voltage guardband, and < 1.00
will decrease the voltage guardband.
FIVR Conguration