ASROCK Z690 PG Riptide - Page 83

English
76
Core Voltage Mode
Selects between Adaptive and Override Voltage modes. In Override Mode, the volt-
age selected will be applied over all operating frequencies. In Adaptive mode, the
voltage is interpolated only in turbo mode.
Core Extra Turbo Voltage
Species the extra turbo voltage applied while the IA Core is operating in turbo
mode.
VF Oset Mode
Selects between Legacy and Selection modes. Need Reset System aer enabling
OverClocking Feature to initialize the default value. In Legacy Mode, setting a
global oset for the entire VF curve. In Selection modes, setting a selected VF point.
VF Conguration Scope
Allows all cores VF curve or per-core VF curve conguration.
Core Voltage Oset
Species the oset voltage applied to the IA Core domain. is voltage is specied
in millivolts.
Oset Prex
Sets the oset value as positive or negative.
Atom L2 Voltage Mode
Selects between adaptive and Override Voltage modes. In Override Mode the volt-
age selected will be applied over all operating frequencies. In Adaptive Mode the
voltage is interpolated only in turbo mode. Uses Mailbox 0SR 0x150, cmd 0x10,
0x11.
Atom L2 Extra Turbo Voltage
Species the extra turbo voltage applied while Atom L2 is operating in turbo mode.
Uses Mailbox MSR 0x150, cmd 0x10, 0x11. Range 0-2000 mV.
Atom L2 Voltage Oset
Species the Oset Voltage applied to the Atom L2 domain. is voltage is specied
in millivolts. Uses Mailbox MSR 0x150, cmd 0x11. Range -500 to 500 mV.